Die Casting Machine DC-420V4N
420 tons is applicable for V4N series
- Clamping force 420 tons
- Distance between tie-bar 650 x 650 mm
- Max injecting weight 4.18 kg
- Die height 300 - 700 mm
ITEM | UNIT | VALUE | |||
---|---|---|---|---|---|
Basic | Control Unit | PLC + MMI | |||
Shot Unit | 3 Phases | ||||
Multi-stage Injection | Optional | ||||
CLAMPING MECHANISM | Clamping Force | ton | 420 | ||
Die Platen | mm | 1000 x 1000 | |||
Tie-bar Distance | mm | 650 x 650 | |||
Die Stroke | mm | 470 | |||
Die Height | mm | 300 - 700 | |||
INJECTION MECHANISM | Injection Force | ton | 35 | ||
Intensifying Rate | 2.3 | ||||
Injection Stroke | mm | 500 | |||
Plunger Tie Penetration | mm | 185 | |||
Shot Position | -150 | ||||
Injection Pressure | kg/cm² | 110 - 140 | |||
Max Injection Velocity (up) | m/s | 7 | |||
Available Plunger Diameter | mm | Ø60 / Ø70 / Ø80 | |||
EJECTING MECHANISM | Ejecting Force | ton | 20 | ||
Ejecting Stroke | mm | 90 | |||
CORE SYSTEM | Core no.1 Outlet | pt | 3/4" x 2 | ||
Core no.2 Outlet | pt | 3/4" x 2 (Optional) | |||
Core no.3 Outlet | pt | X | |||
CASTING CAPACITY | Plunger Diameter | mm | Ø60 | Ø70 | Ø80 |
Injection Pressure | kg/cm² | 600 - 1200 | 441 - 882 | 337 - 674 | |
Casting Area | cm² | 292 - 584 | 397 - 794 | 518 - 1036 | |
Injecting Volume | cm³ | 904 | 1230 | 1607 | |
Injecting Weight | kgs | 2.35 | 3.2 | 4.18 | |
COOLER | Water Inlet | Rc PT | 2" | ||
Water Outlet | Rc PT | 2" | |||
Hydraulic Cooler In | Rc PT | 1" | |||
Hydraulic Cooler Out | Rc PT | 1" | |||
Die Water Valve (fix) | 3/8" x 7 | ||||
Die Water Valve (mov) | 3/8" x 7 | ||||
Hydraulic Cooler Flow | L/min | 40 | |||
Die Cooler Flow | L/min | 30 - 70 | |||
MOTOR | Motor | kw | 22.5 | ||
Power Source | V | AC220/380 | |||
MACHINE DIMENSIONS | Size (L x W x H) | mm | 6500 x 2200 x 2500 | ||
Weight | ton | 16 | |||
Hydraulic Oil | L | 800 |